Payment & Shipping Terms:
|Rope Diameter:||3-199mm||Rope Capacity:||100-10000m|
|Rotation:||Left, Right||Colour:||Gray Customized|
|Groove Type:||Lebus Or Smooth Or Spiral||Sling Type:||Cable Or Wire Rope|
|Condition:||Customized Fully Machined||Motor:||Electric/ Hydraulic Device|
|Applicaiton:||Building Wipe Winch||Other Name:||Diamond Screw Levelwind|
|Layer:||As The Rope Capacity|
Steel Spooling Device Winch Rope Lining Device For High Tonnage Winch
product brief intoduction:
|product name||spooling winch|
|Drum design||Lebus groove or sprial ,smooth groove|
|Colour||blue or customer base|
|Sling||cable or wire|
|Direction rotation||left or right|
|Parameter||can design as customer base require|
Our Lebus design groove advantage:
The Lebus system keeps the spooled rope in a regular movement, evenly distributing the load between the individual layers of rope. This prevents lower layers being crushed or pinched by upper layers. Independent field tests have proved over the years that the Lebus system can extend rope life by more than 500%.
1. The rope winding device of the winch (spooling device winch) adopts the principle of double rotating screw to drive the rope wheel to move back and forth,It is mechanical transmission device, easy to use, safe and reliable.
2. The winch rope arranging device consists of six parts, namely, power output part, transmission box, clutch, spiral sleeve part, rope supporting part and base.
3. In the installation process, does not require any part of the transformation of the winch, only needs to install the outer gear on the winch motor side, the power of the motor output.
4. Winch drum - gear box - screw sleeve rotation - rope wheel reciprocating movement.
The bidirectional reciprocating screw is made of two screw threads with different rotating directions on one screw rod.That is, a right-hand thread, a section of left-hand thread. The right and left nuts are respectively connected with the moving parts. When the screw is rotated, the two moving parts rapidly approach or separate along with the nut so as to produce the required mechanical function
Reference parameter of sometype:
( that can be designed to meet customer requirement)
When you need a spooling level system
1. Lack of Adequate tension on the wire rope.
2. No fixed sheave to go to and from the Winch drum.
3. In some rare cases, the construction of the wire rope.